Messaging, Music and Moving Around
I was reading this article about the potential removal of the NIS (Network Information System) component from Fedora systems. It reminded me of an old experience managing our department’s systems.
Continue reading “Memories are made of NIS”This post was last updated on November 11th, 2021 at 11:07 am
Last week I went to edit a draft post, and found that I couldn’t access the blogging system. The web server returned errors – usually 504 (Gateway Timeout) but there were sometimes 4xx errors. This all runs on a local NAS device just a few metres away from where I was typing. The rest of my network seemed fine. So it seemed unlikely to be a network or service provider problem. I started to investigate. As there is no high-value or personal information stored here, I didn’t initially suspect an attacker. But that’s what it turned out to be. I decided to write up my experience, written to show the skeleton of how a site attack might appear, along with some thoughts on what helped diagnose and repel it.
Continue reading “Skeleton of a site attack”This post was last updated on November 15th, 2021 at 09:48 am
A recent thread on mqseries.net asked about controlling queue creation in MQ. In particular, how to set authorities so that one user can create queues like “ABC…” but not “DEF…”. There are answers given in that thread both on the ability to do it, and the reason why it’s not usually something that’s needed.
In summary, it’s not possible to control it with setmqaut commands. And since queue creation is usually done by administrators, there’s not really any need to restrict it further.
But the thread did remind me of some code I’d written a few years ago while considering the same question as part of a larger piece of work. And so I thought I’d dredge up that PoC and make it a bit more readable. It shows how you can, in fact, implement that level of control on platforms where you can install extensions to the MQ Authorisation interface.
Continue reading “Controlling queue creation”One of the common mistakes that people make when they first start programming with the MQI can be seen in this pseudo-code example:
MQMD md = {MQMD_DEFAULT}
MQGMO gmo = {MQGMO_DEFAULT}
int bufsize = 128
PMQCHAR buf = malloc(bufsize)
do {
MQGET(&md,&gmo,buf,bufsize))
} while (rc != MQRC_NO_MSG_AVAILABLE)
They complain that despite pre-loading the queue, only a single message is returned. Anyone reading this is likely to recognise immediately the problem: the MsgId of the first message is returned in the md variable. The next iteration of the loop tries to match that MsgID and doesn’t find any more messages.
There are aspects of the MQI that try to minimise your chances of getting this wrong, like the MatchOptions flag in the MQGMO structure. But that in turn requires you know a) to set it and b) override the default version of the structure.
Having worked with MQ for so many years, I am hopefully not going to make that kind of mistake. But I still got caught out recently by a very similar problem.
Continue reading “Variation on a theme: an MQI mistake”This post was last updated on September 20th, 2021 at 08:17 am
The mq-metric-samples collectors that send IBM MQ metrics and status data to a range of databases, ready to be viewed in Grafana, have just been enhanced to collect additional information. The Prometheus collector has also been extended so that it can continue providing limited status even when the queue manager is down.
The new metrics have all been suggested by users of the package either directly or via issues raised in the GitHub repository. Many previous articles on here show more about the collectors.
The InfluxDB collector is also refreshed for a new version of the database.
Continue reading “New features with the MQ Go metric collectors”This post was last updated on November 27th, 2021 at 02:59 pm
I was talking to someone tonight who said that it looked like there would be a new layer of bureaucracy applied to how their z/OS system was managed. It made me think of way back, when I first worked for IBM … Hursley’s “production” systems had a level of process and change control. Though as those boxes were all used for development activity it was still less hidebound than you might get (or hope for) in a banking datacentre. But our department had its own mainframe, under more local control. The sysprogs lived on the same corridor, and would do pretty much whatever you needed. Especially after a lunch meeting at the Dolphin.
And then I realised that our MVS system – probably an IBM 4381 if I remember right – was likely sited at pretty much where my desk is now. A desk which I’ve only seen a couple of times over the last year, but where I had to go yesterday after an area-wide power outage that had taken out an old desktop Linux box that would blow away that 4381 with its processing capability. Some of what’s now desks used to be a mini-machine room.
The Request for Enhancement (RFE) system that lets you submit new requirements and ideas for IBM MQ has been moved to a new interface. Just about all IBM products are moving to use Aha! to give a common front-end, and it is now MQ’s turn to migrate.
This post is a quick look at what this means.
Continue reading “New interface for MQ Requirements”This post was last updated on September 7th, 2021 at 02:33 pm
Doing a web seminar session yesterday I knew I wanted a second machine available. Partly as an HA failover backup (just in case), and partly to act as a view of what the other participants were seeing – which I can’t see on the system I’m driving a presentation from. Though as I cabled everything together, it did start to look a little silly. Or like a set from a bad TV show.
But I did actually find a use for just about all of the panels.
The secondary system had the live seminar contents, along with the text-based chat screen so I could see when people raised questions. And I had some written notes associated with the presentations that I could scroll through as the event progressed.
The primary system had one panel with the full-screen presentation, another panel with a preview of the next slide, and a further panel with all my other activities including a chat window where I could type private notes to my co-presenter if necessary.
Could I have managed with fewer screens? Probably, but having all that space did make it easy to manage and have the windows and fonts expanded large enough so I didn’t have to peer hard at small text.
I’ve now moved the 2nd laptop next to the big TV so I can use it to show the county championship cricket games available only via live streaming services. But it can brought back to the desk if needed for another web conference.
This post was last updated on April 30th, 2021 at 02:41 pm
If you’ve done any work with the Spring frameworks for Java programs, then you will know that one of the good things about Spring is that it hides a lot of the underlying operations from you. But equally, one of the bad things about Spring is that it hides a lot of the underlying operations from you. I noticed that I was getting several questions about what was happening under the covers from people using the MQ Spring Boot starter. This post shows how you can see what Spring is doing to a queue manager.
Continue reading “What did Spring do to my queue manager”This post was last updated on May 4th, 2021 at 08:50 pm
I was doing a crossword puzzle last week, and one of the clues required that you know about logarithm tables. I realised I hadn’t seen those for many years since we’d been taught how to use them at school – calculators were around but not ubiquitous. You had to know how to look up logs (base 10 and natural), sines, square roots etc in these pages. Feeling a bit nostalgic I did a search of bookstores, paid a small amount, and yesterday a book turned up.
Now if only I could remember where I put that slide rule …
This post was last updated on February 4th, 2021 at 04:28 pm
